| Quantity: | |
|---|---|
Water-resistant Epoxy Cargo Hold Paint ZD6305
Water-resistant Epoxy Cargo Hold Paint ZD6305 is a two-component High abrasion resistant anti corrosive epoxy , based upon pure epoxy technology.
It is suitable for High abrasion resistant epoxy suitable for Dry Cargo Hold, Decks etc. etc. Protective use: Suitable for atmospheric and immersion abrasion resistance and anti-corrosion area.
Advantages of Water-resistant Epoxy Cargo Hold Paint
· High abrasion resistant epoxy suitable for Dry Cargo Hold, Decks etc.
· Good abrasion resistance for dedicated areas of application
· Good adhesion to steel and galvanized steel and non-ferrous metal
· Good flow and wetting properties
· Good flow and wetting properties
· Cures even at temperatures down to -10°C (14°F)
· Suitable for touching up of weld seams and damages of epoxy coatings during construction
· Excellent recoat ability
· Suitable on wet blast cleaned substrates (damp or dry)
· Compatible with well-designed cathodic protection systems
· Meet US FDA 21 CFR 175.300, suitable for grain products, non toxic effect.
· It can be used as ballast tank once dry cargo holds take ballast tanks function.
Physical Constants
Type | Two components |
Item no | ZD6305 |
Color | Customized |
Gloss |
|
Volume solids | 84±3% |
Solid by weight | ≥70% |
Density | 1.5KG/L |
Recommended DFT | 75μm-250μm |
Theoretical coverage | 3.46kg/㎡ (160μm DFT) |
Touch-dry | 4hurs (@20°C) |
Application methods | Spray, Rolling, Brush |
Application conditions | Temperature -10°C-50°C, humidity <80% |
Shelf life | 12 months from manufacture date (unopened) |
Pot life | 3 hours (@20°C) |
Pack | 29.0(25.1+3.9 kgs/Kit |
Mixing ratio | 6.44:1 (base: hardener) |
Storage | In a cool and ventilated place |
MOQ | 500kgs |
Country of Origin | Jiangsu province, China |
Water-resistant Epoxy Cargo Hold Paint
2 Coats System
· Epoxy primer (60μm-300μm) +Fluorocarbon (40μm-100μm)
· Epoxy graphene zinc (60μm-160μm) + Aliphatic Polyurethane (30μm-80μm)
3 Coats System
· Epoxy primer (60μm-300μm) + MIO coat (100μm -180μm) + Aliphatic Polyurethane (30μm-80μm)
· Epoxy zinc primer (60μm-80μm) + MIO coat (100μm -180μm) + Aliphatic Polyurethane (30μm-80μm)
· Epoxy graphene zinc (60μm-160μm) + MIO coat (100μm -180μm) + Aliphatic Polyurethane (30μm-80μm)
· ZINDN96-1 (60μm-80μm) + ZINDN sealer (60μm -120μm) + Aliphatic Polyurethane (30μm-80μm)
Applications
Application Notes
1. The specified thinner must be used and applied on the compatible primer or intermediate paint; otherwise, it will affect the product quality.
2. During the paint preparation process, it is strictly forbidden to contact with water, acid, alkali, alcohol, etc.
Component B is very easy to react with water and other substances. The packaging barrel of the remaining component B after preparation must be tightly covered.
3. During the application, drying, and curing period, the relative humidity shall not be greater than 85%.
4. During the application process, or shortly after the application, the surface is subjected to water vapor condensation and sudden cooling, which will cause the surface to lose gloss, turn white, and deteriorate in quality.
5. When applications are made by either roller or brush, multiple coats may be required to obtain a complete covering effect, especially for some lead-free bright colours such as yellow, orange, etc.
